DCB232 - Matte Black Case w/ Fixed Bezel

This is a 3 o'clock case various Seiko movements including the NH35. The case has a 37.4mm diameter when fully assembled and very similar to the SKX023 cases. While it does take design cues from the SKX023, the parts are not compatible.  This item comes with an installed fixed bezel, installed crystal, solid case back with the appropriate gasket, and a customer selected crown.  Case specifications are below:

Case Material: 316L Stainless Steel
Finishing: Matte Black
Case Diameter: 37.4mm (with bezel)
Case Thickness: 12.1mm (with bezel at edge)
Lug to Lug Height: 44.7mm
Lug Width: 20mm
Caseback Screw down, solid , Matte Black Finish
Water Resistance 20ATM with proper assembly

Included:
- Case w/ installed bezel and double domed sapphire crystal (blue AR coating on the underside; note that because it is a double domed crystal, the thickness is taller towards the center of the watch)
- Matching caseback
- Gasket for caseback

Compatibility:
These cases are compatible with the following: 
- Seiko automatic movements: 7s26, 7s36, 7s25, 7s35, 6r15, 4r15, 4r35, 4r36 (and NH/NE equivalents, including the NH34)
- 28.5mm dials
- Bezels: AJuiceT DBxxxx bezels, though it is extremely hard to remove this fixed bezel
- Crowns: AJuiceT DCSxxx and DCTxxx crowns and SKX013 Crowns

Note: These are designed for using the gray spacer that typically comes in Seiko movements like the NH35 and do not require a chapter ring. The tolerances for the bezel are extremely tight, so these will come pre-installed. If you do not want want this pre-installed, please send me a message beforehand.